CORE_Choose a build
High-End build checklist

KNOW YOUR PARTS.
BUILD WITH CARE.

Start with the exact parts, then work through preparation, assembly and first boot.

Purchasing offers: HOLD. Use the exact hardware notes below with the assembly checklist. CORE has not physically built or tested this configuration.

Check the specification →

Specification: RECOMMENDED

Reviewed

Who it is for. An enthusiast building for 4K, ray tracing or CPU-limited high-refresh gaming, who accepts diminishing returns.

A distinct premium specification: RTX 5080 graphics, a gaming-focused 9800X3D and 2TB storage. Its price premium is most defensible for the intended ray-tracing and high-refresh audience, rather than maximum raster frames per pound.

Why these parts, and what to consider

Strengths

  • RTX 5080 provides a stronger ray-tracing proposition than the Performance tier.
  • 9800X3D targets CPU-limited gaming; 2TB gives more library space.
  • Stock-power air cooling and the specified native PSU cable avoid unnecessary liquid-cooling complexity.

Trade-offs

  • Both tiers have 16GB graphics memory. The price increase is not matched by proportional raster performance.
  • 4K ray tracing can still need upscaling and reduced settings; CPU gains shrink when GPU-limited.
  • The dual-tower cooler and GPU power cable need careful installation and clearance checks before closing the glass.

Premium specialist tier with diminishing returns. Performance remains the more balanced choice for most 1440p builders.

Dated cost reference: £2,874.81 on 25 Oct 2026. VAT-inclusive component observations from the 25 October 2026 owner review. Excludes delivery, Windows, peripherals, assembly and whole-system support. Not a current quote, buying threshold or guaranteed total.

Independent component testing supports the intended use; these are not measured CORE system results.

Independent GPU raster and ray-tracing comparison ↗ · Independent 9800X3D testing ↗ · Exact EVO cooler specifications ↗

An editorial recommendation assesses the specification. It does not approve any retailer offer. CORE has not physically built or thermally tested this exact PC; follow the hardware checks and manufacturer manuals.

Specification: high-end-2026-10-5080 · Reviewed 2026-10-25. HOLD — purchasing evidence and approval remain incomplete.

Exact hardware checklist

Match these eight models to the parts you receive. Product references help identify hardware; they are not live buying recommendations. Keep the exact manufacturer manuals beside you.

  1. AMD Ryzen 7 9800X3D

    100-100001084WOF

    Ryzen 7 9800X3D, AM5, no included cooler. MSI lists support from BIOS 7E81v1A0 on this exact board. Confirm the supplied BIOS and follow its Flash BIOS instructions if needed. Keep stock power settings; do not apply automatic motherboard overclocking.

    Exact product reference ↗

    Check current price at retailer ↗Scan · Reference listing only. Retailer prices, stock and delivery terms may change; this is not an approved offer.

  2. Inno3D GeForce RTX 5080 X3 16GB (non-OC)

    N50803-16D7-176068N

    300 × 116 × 41mm; fits the H6 Flow 365mm GPU length allowance. Install in PCI_E2, which runs at PCIe 4.0 x16 on this board. Inno3D specifies an 850W minimum PSU. Use the RM850x native 12V-2x6 GPU cable, fully seated at both ends. Check cable bend clearance and glass-panel closure without pressure on the connector. Physical cable clearance and stock-load temperatures remain unverified.

    Exact product reference ↗

    Check current price at retailer ↗Overclockers UK · Reference listing only. Retailer prices, stock and delivery terms may change; this is not an approved offer.

  3. MSI B850M GAMING PLUS WIFI6E

    B850M GAMING PLUS WIFI6E

    MSI B850M GAMING PLUS WIFI6E, micro-ATX. Fit only matching standoffs. RAM in A2/B2, SSD in M2_1, GPU in PCI_E2 (the long CPU-connected slot, not PCI_E1). CPU support starts at 7E81v1A0 for both 9600X and 9800X3D. Connect 24-pin ATX and the CPU EPS leads to the labelled power headers; JFP1 for case switches, JAUD1 for audio and matching USB headers per manual.

    Exact product reference ↗

    Check current price at retailer ↗Scan · Reference listing only. Retailer prices, stock and delivery terms may change; this is not an approved offer.

  4. Klevv FIT V 32GB (2×16GB) DDR5-6000 CL28

    KD5AGU880-60B280L

    Install both 33.21mm-high modules in A2/B2. Start at JEDEC defaults; allow memory training. EXPO 6000 is optional overclocking, not a guaranteed speed. If unstable, return to defaults. Exact QVL membership is not claimed.

    Exact product reference ↗

    Check current price at retailer ↗Overclockers UK · Reference listing only. Retailer prices, stock and delivery terms may change; this is not an approved offer.

  5. WD Blue SN5100 2TB

    WDS200T5B0E-00CPE0

    Bare 2TB M.2 2280 SN5100 in M2_1. Secure the retention and remove the heatsink thermal-pad film. The extra capacity is for a larger game library; it is not a promise of higher frame rates.

    Exact product reference ↗

    Check current price at retailer ↗Ballicom · Reference listing only. Retailer prices, stock and delivery terms may change; this is not an approved offer.

  6. Corsair RM850x (2024), UK

    CP-9020270-UK

    160mm PSU within the H6 Flow 200mm allowance. Use only the supplied native 12V-2x6 cable for this RTX 5080; fully seat both ends. Do not follow the earlier Reaper two-8-pin cable plan. CPU/EPS cables go only to motherboard CPU power. Never mix modular cables from different PSUs. Retain stock power settings and check cable clearance before powering on.

    Exact product reference ↗

    Check current price at retailer ↗Scan · Reference listing only. Retailer prices, stock and delivery terms may change; this is not an approved offer.

  7. Thermalright Phantom Spirit 120 EVO

    Phantom Spirit 120 EVO

    Exact EVO model, not SE, Digital or Vision. Confirm the package and invoice identify Phantom Spirit 120 EVO; a regional numeric MPN/EAN is not independently established. Use its AM5 kit and retain the AM5 backplate. Remove cold-plate film and apply paste per manual. Connect the two PWM fans to CPU_FAN1 using the supplied splitter within the header rating. Nominal 157mm height leaves 6mm below the case limit: check front-fan clearance over 33.21mm RAM without exceeding 163mm. Optional lighting uses 5V 3-pin ARGB only, never 12V RGB. Physical fit and thermals remain unverified.

    Exact product reference ↗

    Check current price at retailer ↗Computer Orbit · Reference listing only. Retailer prices, stock and delivery terms may change; this is not an approved offer.

  8. NZXT H6 Flow black (2023)

    CC-H61FB-01

    Original non-RGB CC-H61FB-01: GPU allowance 365mm, cooler 163mm, PSU 200mm. Use micro-ATX standoffs only. Connect the three included intake fans to suitable SYS_FAN headers within their current ratings; set DC/PWM mode for the actual plugs. Route JFP1, JAUD1 and USB leads using the board manual. Check cable bends and panel closure before powering on.

    Exact product reference ↗

    Check current price at retailer ↗Scan · Reference listing only. Retailer prices, stock and delivery terms may change; this is not an approved offer.

Assembly, first boot and care

Follow the assembly checklist, then install Windows. Check CPU temperature and fan operation at first boot, then check temperatures and stability under load before enabling memory profiles. Stop if cooling is not working; inspect mounting and cabling with the power disconnected.

CORE has not physically built or thermally tested this exact configuration. Keep your parts list and manuals for maintenance and upgrades. Looking after your PC →

Recover an earlier saved specification

Historical specification: high-end-2026-10

HOLD — retained for owners of these exact parts, not a current purchasing recommendation. Do not apply the RTX 5080 cable plan to this earlier Reaper build.

  1. AMD Ryzen 7 9800X3D — 100-100001084WOF

    Ryzen 7 9800X3D, AM5, no included cooler. MSI lists support from BIOS 7E81v1A0 on this exact board. Confirm the supplied BIOS and follow its Flash BIOS instructions if needed. Keep stock power settings; do not apply automatic motherboard overclocking.

    Original product reference ↗
  2. PowerColor Reaper RX 9070 XT 16GB — RX9070XT 16G-A

    289mm body / 304mm including bracket; fits the H6 Flow 365mm length allowance. Install in PCI_E2. Use two separate supplied RM850x PCIe 6+2-pin leads, one per socket. Do not use EPS cables or the unused 12V-2x6 lead.

    Original product reference ↗
  3. MSI B850M GAMING PLUS WIFI6E — B850M GAMING PLUS WIFI6E

    MSI B850M GAMING PLUS WIFI6E, micro-ATX. Fit only matching standoffs. RAM in A2/B2, SSD in M2_1, GPU in PCI_E2 (the long CPU-connected slot, not PCI_E1). CPU support starts at 7E81v1A0 for both 9600X and 9800X3D. Connect 24-pin ATX and the CPU EPS leads to the labelled power headers; JFP1 for case switches, JAUD1 for audio and matching USB headers per manual.

    Original product reference ↗
  4. Klevv FIT V 32GB (2×16GB) DDR5-6000 CL28 — KD5AGU880-60B280L

    Install both 33.21mm-high modules in A2/B2. Start at JEDEC defaults; allow memory training. EXPO 6000 is optional overclocking, not a guaranteed speed. If unstable, return to defaults. Exact QVL membership is not claimed.

    Original product reference ↗
  5. WD Blue SN5100 2TB — WDS200T5B0E-00CPE0

    Bare 2TB M.2 2280 SN5100 in M2_1. Secure the retention and remove the heatsink thermal-pad film. The extra capacity is for a larger game library; it is not a promise of higher frame rates.

    Original product reference ↗
  6. Corsair RM850x (2024), UK — CP-9020270-UK

    160mm PSU within the H6 Flow 200mm allowance. Use two separate supplied Type 4 PCIe 6+2-pin cables for the Reaper GPU. CPU/EPS cables go only to motherboard CPU power. Never reuse another PSU’s modular cables. Leave the native 12V-2x6 GPU cable unused.

    Original product reference ↗
  7. Thermalright Peerless Assassin 120 SE non-RGB — PA120 SE 1700

    Peerless Assassin 120 SE non-RGB, not another revision. Use its AM5 kit and retain the AM5 backplate. Remove cold-plate film and apply paste according to the manual. Two PWM fans connect to CPU_FAN1 with the supplied splitter within the header rating. Nominal height 155mm versus the case’s 163mm: check the front fan clears 33.21mm RAM without exceeding 163mm. Exact fan position and stock-load temperatures require physical verification.

    Original product reference ↗
  8. NZXT H6 Flow black (2023) — CC-H61FB-01

    Original non-RGB CC-H61FB-01: GPU allowance 365mm, cooler 163mm, PSU 200mm. Use micro-ATX standoffs only. Connect the three included intake fans to suitable SYS_FAN headers within their current ratings; set DC/PWM mode for the actual plugs. Route JFP1, JAUD1 and USB leads using the board manual. Check cable bends and panel closure before powering on.

    Original product reference ↗